Control unit Professional

Control unit Professional

  • SEQUA
  • Q10059
€539.00 *

Prices incl. VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

Functions available on all control units: Running light The optical... more
Product information "Control unit Professional"
Lauflicht-Effekt: ✓ (deaktivierbar)
Ambientebeleuchtung: ✓ Ambientebeleuchtung
Dauerlichtschalter-Anschluss:
Dämmerungssensor-Anschluss:
Soft-On / Soft-OFF: ✓ (4K)
Ein- und Ausschalt-Geschwindigkeit: Einstellbar
Ein- und Ausschalt-Zeitverzögerung: Einstellbar
Eingangsspannung (V): 10 - 24 V
LED-Ausgänge (Stufen): Bis zu 20 (erweiterbar auf 26) Stufen
LED-Ausgangsleistung: 500 mA / Kanal (10 A gesamt)
Antrittsbeleuchtung: ✓ Mit Antrittsbeleuchtung
Schnellstart-Funktion: ✓ Mit Schnellstart-Funktion
Abnehmbare LED-Anschlussklemmen:
Anschluss an Hausautomatisierung: ✓ (ON, OFF, Präsenzmelder, Ambientebeleuchtung)
Präsenzmelder-Anschluss: ✓ Mit Präsenzmelder-Anschluss
Einstellbare LED-Helligkeiten (Stufenbeleuchtung): ✓ Individuell einstellbare Helligkeiten
Einstellbare LED-Helligkeiten (Ambientebeleuchtung): ✓ Individuell einstellbare Helligkeiten
Modus für nicht-dimmbare-Leuchtmittel: ✓ Kompatibel zu nicht-dimmbaren LEDs
Erweiterte Sensorkalibrierrung:
Abmessung: 162 x 90 x 75 mm
Teilungseinheiten: 9 TE

Functions available on all control units:

Running light

The optical highlight of the staircase lighting - the softly dimmed, step-by-step switching on of the LEDs - is of course integrated in each of our LED control units, but can also be deactivated on each control unit.

Sophisticated: When two people use the stairs, the light runs towards each other particularly effectively and switches off again from the centre.

Ambient lighting

The LED outputs (up to four) unused for step lighting can be used for additional, general stair lighting. These LED outputs are lightly switched on permanently and thus provide atmospheric basic lighting (brightness can be set on the control unit Professional). When the staircase is entered, these LEDs are then activated simultaneously and completely. Ideal for LED strips in the handrail or spotlights in the ceiling

Permanent light

Permanent light? No problem! On all control units there is a connection for an external switch which activates all connected LEDs softly dimmed.

Sophisticated: The continuous light can be switched on at any time, even when the LED control is in standby mode. It is also possible to use a changeover circuit.

Twilight sensor

The connection of a twilight sensor that deactivates the automatic control unit during daylight ensures that the gears are switched according to demand and save energy.

In addition to the automatic system, in standby mode the entrance and ambient lighting are also switched off.

Soft-ON / Soft-OFF

The Soft-ON/Soft-OFF circuit ("dimmer") of all control units ensures particularly smooth transitions when switching the lighting on and off. Flicker-free and without hard switching operations, this always guarantees a pleasant light.

Speed / time delay

The speed at which the step lighting is switched on and off, as well as the time  delay between switching on and switching off, can be adjusted to suit your requirements using separate rotary controls on the control units.

Well thought-out: Each time the staircase is stepped on again, the time delay restarts, so that the light remains switched on long enough for subsequent persons to follow.

Universal input

You have the free choice: Whether 10 V LED spotlight, 12 V spot, or 24 V LED strip - our LED control units work with all common LED illuminants without being dependent on a specific operating voltage.

Climate neutral in operation

With the help of the renowned company "ClimatePartner", we compensate for the CO² emissions generated by the standby power consumption of the LED control unit - during continuous operation and throughout the entire warranty period of the control unit.

Made in Germany!

SEQUA's LED controllers have been specially developed in Germany and are completely manufactured in Germany. The result: High quality "Made in Germany" that you can rely on.

3 years manufacturer warranty

As an expression of confidence in the quality of our products, we grant a three-year manufacturer's warranty on all SEQUA LED control units. We also ensure a good supply of spare parts in the long term and, if necessary, the reparability of our control units.

Additionally on the Advanced and Professional control units:

Approach lighting

When this function is activated, the first and last stages are illuminated permanently dimmed (brightness can be set on the Professional control unit). Optically highlighted in this way, this creates a plus in safety and a basic lighting of your stairs that is pleasant to the eye.

Quick start

With the switchable Quick Start function, the first steps are activated at increased speed when you enter the stairs, so that the steps in front of you are illuminated immediately. Optically trimmed to perfection, this acceleration is very inconspicuous and is dependent on the set switch-on speed. 

20 LED outputs - expandable

With the 20 LED outputs of the controller you can easily illuminate long stairs in old buildings. Guide value: A staircase in a new building usually has 14 to 16 pitches, stairs in old buildings often have a few more steps.

No ordinary stairs? No problem! Stairs with up to 26 steps can also be illuminated with an additional module.

Powerful

The increased switching capacity of 500 mA per LED output makes it easy to fully illuminate even very wide steps with LED strips. All LED outputs are equipped with a separate fuse for a long service life and safe use.

Removable connection terminals

Removable screw terminals allow the LED supply lines to be conveniently screwed together without being attached to the control unit. When carrying out conversion work, the cables can also be removed from the control unit without having to loosen the screw connections or mix up cables in sequence.

Connection cable

Coupling the control units (Advanced/Profesional) by means of the connection cable allows the use of a twilight sensor on several control units.

This eliminates the need for redundant twilight sensors, the laying of additional cables, and allows the ECUs to switch off and on synchronously.

Additionally on the control unit Professional:

Home automation

The staircase lighting can be easily integrated into your home automation system via the additional connections* of the Professional control unit. (*galvanically isolated, can be wired via relay actuators) 

Use your existing home control system to switch on staircase lighting, deactivate sensor-controlled automatic systems or use existing motion detectors for the presence detector function. 

Presence detector connection

An additional motion detector (presence detector) can be connected to the Professional control system to ensure that staircase lighting remains activated as long as people are present in the staircase area.

This enables an optimally flowing lighting effect without unnecessarily long switch-off delays and without the risk of standing in the dark.

Brightness adjustable

You can freely adjust all LED brightness levels on the Professional control unit. For example, you can limit the luminosity of LED spotlights that are too bright, or switch on all steps permanently - slightly dimmed as orientation light.

The brightness of the entrance/ambient lighting can also be adjusted separately according to your wishes. 

Dimmability can be deactivated

Deactivating the dimming function of the control unit enables the operation of non-dimmable lamps. When activated, the LED outputs of the control unit switch "on" and "off" without gradations. 

This function also supports the switching of larger loads or 230 V spotlights via interposed coupling relays.

4K dimmer

For a particularly natural switching on and off of the LED lighting, the Professional Dimm module controls the LEDs not only in the finest gradations (4000, instead of 250), but also in a switch-on curve specially adapted to the human eye. 

Extended sensor calibration

The switchable, extended sensor calibration suppresses all kinds of interferences, such as direct light incidence or reflective surfaces in the sensor area even more reliably. Also ideal for double staircase entrances and exits where the light effect is to be triggered in one direction only. 

 

The "Professional 9020" control unit offers you the greatest possible range of functions and maximum performance in the field of our stair lighting systems.

You can adapt the lighting effect to your individual wishes via numerous setting options: In addition to the switchable "approach lighting" and the "quick start" function, the Professional control unit also has a "NO-DIMM" function. This enables the operation of non-dimmable lamps. For a particularly natural switching on and off of the LED lighting, the Professional dimming module controls the LEDs not only in the finest gradations (4000, instead of 250), but also in a switch-on curve specially adapted to the human eye. The brightness of the LEDs can be adjusted via separate controllers: If the LED spotlight is too bright, you can limit the luminosity (min. 70%), or let the LEDs shine permanently, as orientation light, slightly dimmed (max. 30%).

With the 20 LED outputs of the control unit you can easily illuminate long old building stairs. The large switching capacity (500 mA) per output - each separately protected against overload by a fuse - also allows the lighting of very wide, or spiral staircases with LED strips. Numerous protective circuits are integrated in the device for long-lasting and safe operation, such as reverse polarity protection, as well as short-circuit and overload protection.

Optimised for installation in smart home environments, the Professional control unit is equipped with additional (galvanically isolated) connections for all common home automation systems: central brightness sensors or home automation buttons can easily be used on the LED control.

A further highlight of the is the possibility of connecting an additional motion detector (presence detector), which ensures that the staircase lighting remains activated as long as people are present in the staircase area. This enables an optimally flowing lighting effect without an unnecessarily long switch-off delay and without the risk of standing in the dark. 

The standardised terminal block housing enables professional installation directly in house distribution boards.

LED-Steuergerät Professional (ohne Sensoren, Netzteil) zur Verwendung als Ersatzteil für ein... mehr
  • LED-Steuergerät Professional (ohne Sensoren, Netzteil) zur Verwendung als Ersatzteil für ein bestehendes System
Read, write and discuss reviews... more
Customer evaluation for "Control unit Professional"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Eigenschaften: "Control unit Professional"
Lauflicht-Effekt: ✓ (deaktivierbar)
Ambientebeleuchtung: ✓ Ambientebeleuchtung
Dauerlichtschalter-Anschluss:
Dämmerungssensor-Anschluss:
Soft-On / Soft-OFF: ✓ (4K)
Ein- und Ausschalt-Geschwindigkeit: Einstellbar
Ein- und Ausschalt-Zeitverzögerung: Einstellbar
Eingangsspannung (V): 10 - 24 V
LED-Ausgänge (Stufen): Bis zu 20 (erweiterbar auf 26) Stufen
LED-Ausgangsleistung: 500 mA / Kanal (10 A gesamt)
Antrittsbeleuchtung: ✓ Mit Antrittsbeleuchtung
Schnellstart-Funktion: ✓ Mit Schnellstart-Funktion
Abnehmbare LED-Anschlussklemmen:
Anschluss an Hausautomatisierung: ✓ (ON, OFF, Präsenzmelder, Ambientebeleuchtung)
Präsenzmelder-Anschluss: ✓ Mit Präsenzmelder-Anschluss
Einstellbare LED-Helligkeiten (Stufenbeleuchtung): ✓ Individuell einstellbare Helligkeiten
Einstellbare LED-Helligkeiten (Ambientebeleuchtung): ✓ Individuell einstellbare Helligkeiten
Modus für nicht-dimmbare-Leuchtmittel: ✓ Kompatibel zu nicht-dimmbaren LEDs
Erweiterte Sensorkalibrierrung:
Abmessung: 162 x 90 x 75 mm
Teilungseinheiten: 9 TE

Die SEQUA Lichttechnik GmbH hat sich auf die Entwicklung innovativer Beleuchtungssysteme spezialisiert. Unser Anspruch: Zukunftsweisende Funktionen, hochwertige Qualität "Made in Germany" und zeitgemäße Energieeffizienz. So profitieren schon heute viele tausend zufriedene Kunden aus über 20 Ländern von unseren Produkten.

Als Erfinder der sensorgesteuerten LED-Treppenbeleuchtungen und Marktführer in diesem Segment, setzt SEQUA mit den eigens in Deutschland entwickelten LED-Steuergeräten neue Maßstäbe. Darüber hinaus bieten wir Ihnen gerne auch individuell auf Ihre Anforderungen zugeschnittene Beleuchtungslösungen an. Fundiertes Know-How und eine umfangreich ausgestattete Werkstatt (SMD-Bestückungsautomat, CNC-Fräsanlage, Laserschneider, UV/3D-Drucker, etc.) ermöglichen eine schnelle, moderne und kostengünstige Umsetzung.