Close filters
No results were found for the filter!
Our recommendation!
50 m LED connection cable (2x0,5mm²)
50 m LED connection cable (2x0,5mm²)
From €26.90 *
Connection cable set for parallel connection of LEDs
Connection cable set for parallel connection of LEDs
€39.90 * €42.70 *
10 m sensor cable (3x0.25mm²)
10 m sensor cable (3x0.25mm²)
€8.90 *
40 WAGO Terminal blocks (221-412)
40 WAGO Terminal blocks (221-412)
€14.90 *
100 WAGO terminals (221-412)
100 WAGO terminals (221-412)
€32.90 * €37.25 *
100 cable ties
100 cable ties
€1.90 *

Connecting cable and connector for LED stair lighting

With our connection cable sets you connect the LEDs of your staircase lighting with the LED control unit or LED power supply. The connection cable sets are ideally suited for two different applications:

The regular LED connection cable set is designed for the step-by-step connection of the LEDs to the LED control unit. The separate connection of the individual LEDs is required for the gradual switching on and off of the LEDs. The 50 meters of ÖLFLEX connection cable included in the connection cable set are sufficient for most stairs. The LEDs are then connected using the included terminals from WAGO. Thanks to the modern terminals, this is child's play. Without soldering. Simply click. Then the supply cables are connected in sequence to your LED control unit and bundled with the 100 included cable ties.

New is our connection cable set for parallel connection of the LEDs to a power supply. If you do not use the step-by-step automatic control via LED control unit, the LEDs can be supplied together via one connection cable from one power supply unit. The set includes a 15-meter long ÖLFLEX cable with an increased cross-section (1.5 mm2). With the aid of the 3-pole WAGO terminals, 50 of which are included in the scope of delivery, a connection can easily be made from LED to LED, which leads into the common power supply unit at the end. Also included are 100 cable ties to fix the cable.

Connection cables for the sensors

In addition to the high-quality LED connection cables from LAPP, which we also offer separately, you will also find the sensor connection cables in this category. We offer these sensor cables in a regular, as well as a shielded version for particularly robust signal transmission between the sensor and the LED control unit. The manufacturer is also the German producer LAPP, which guarantees the best possible quality of the cables. Buy the suitable connection cables for your staircase lighting directly and conveniently in SEQUA's online store - this guarantees the best quality, as well as compatibility with the control units, power supplies and sensors.

New in our assortment: LED connectors

We offer our new LED connectors in two variants: LED strip to LED strip and LED strip to connection cable. With the strip to strip connector, LED strip sections can be easily reused without having to solder them together. Ideal for illuminating full-width steps when LED sections are being installed anyway. The strip to cable connector is again ideal for LED strips in roll form. Simply insert the connecting cable, as well as the LED strip and press with pliers - the strip is already equipped with the connecting cable. Without having to solder.

Especially for the connection of LED connecting cables in outdoor and damp rooms, our waterproof soldering connectors are the right choice. These are shrunk and bonded in one step with a hot air gun and the tin they contain is melted. The result is a high-quality and waterproof connection of the LED connection cables in the smallest space.

With our connection cable sets you connect the LEDs of your staircase lighting with the LED control unit or LED power supply. The connection cable sets are ideally suited for two different... read more »
Close window
Connecting cable and connector for LED stair lighting

With our connection cable sets you connect the LEDs of your staircase lighting with the LED control unit or LED power supply. The connection cable sets are ideally suited for two different applications:

The regular LED connection cable set is designed for the step-by-step connection of the LEDs to the LED control unit. The separate connection of the individual LEDs is required for the gradual switching on and off of the LEDs. The 50 meters of ÖLFLEX connection cable included in the connection cable set are sufficient for most stairs. The LEDs are then connected using the included terminals from WAGO. Thanks to the modern terminals, this is child's play. Without soldering. Simply click. Then the supply cables are connected in sequence to your LED control unit and bundled with the 100 included cable ties.

New is our connection cable set for parallel connection of the LEDs to a power supply. If you do not use the step-by-step automatic control via LED control unit, the LEDs can be supplied together via one connection cable from one power supply unit. The set includes a 15-meter long ÖLFLEX cable with an increased cross-section (1.5 mm2). With the aid of the 3-pole WAGO terminals, 50 of which are included in the scope of delivery, a connection can easily be made from LED to LED, which leads into the common power supply unit at the end. Also included are 100 cable ties to fix the cable.

Connection cables for the sensors

In addition to the high-quality LED connection cables from LAPP, which we also offer separately, you will also find the sensor connection cables in this category. We offer these sensor cables in a regular, as well as a shielded version for particularly robust signal transmission between the sensor and the LED control unit. The manufacturer is also the German producer LAPP, which guarantees the best possible quality of the cables. Buy the suitable connection cables for your staircase lighting directly and conveniently in SEQUA's online store - this guarantees the best quality, as well as compatibility with the control units, power supplies and sensors.

New in our assortment: LED connectors

We offer our new LED connectors in two variants: LED strip to LED strip and LED strip to connection cable. With the strip to strip connector, LED strip sections can be easily reused without having to solder them together. Ideal for illuminating full-width steps when LED sections are being installed anyway. The strip to cable connector is again ideal for LED strips in roll form. Simply insert the connecting cable, as well as the LED strip and press with pliers - the strip is already equipped with the connecting cable. Without having to solder.

Especially for the connection of LED connecting cables in outdoor and damp rooms, our waterproof soldering connectors are the right choice. These are shrunk and bonded in one step with a hot air gun and the tin they contain is melted. The result is a high-quality and waterproof connection of the LED connection cables in the smallest space.