Home control unit - complete set for automatic LED stair lighting
- Manufacturer SEQUA
- Order number: HOME-12-60-73W
- Product description
Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
| Lauflicht-Effekt: | ✓ (deaktivierbar) |
| Ambientebeleuchtung: | ✓ Ambientebeleuchtung |
| Dauerlichtschalter-Anschluss: | ✓ |
| Dämmerungssensor-Anschluss: | ✓ |
| Soft-On / Soft-OFF: | ✓ |
| Ein- und Ausschalt-Geschwindigkeit: | Einstellbar |
| Ein- und Ausschalt-Zeitverzögerung: | Einstellbar |
| Eingangsspannung (V): | 10 - 24 V |
| LED-Ausgänge (Stufen): | Bis zu 16 Stufen |
| LED-Ausgangsleistung: | 400 mA / Kanal (6,3 A gesamt) |
| Abnehmbare LED-Anschlussklemmen: | ✗ |
| Einstellbare LED-Helligkeiten (Stufenbeleuchtung): | ✗ Fest eingestellte Helligkeiten |
| Einstellbare LED-Helligkeiten (Ambientebeleuchtung): | ✗ Fest eingestellte Helligkeiten |
| Abmessung: | 162 x 90 x 75 mm |
| Teilungseinheiten: | 9 TE |
The Home control unit is characterized by its ease of use: It is supplied fully preset and in a complete set with two matching motion sensors and a powerful power supply. Simply unpack and get started
- Soft-switching, step-by-step running light with automatic sensor control
- Suitable for up to 16-step stairs - for LED spotlights, or LED strips
- Adjustable on/off speed, and waiting time in between
- Standardized housing for mounting in control cabinets and small distribution boxes
- Power consumption of just 0.4 W in operation including sensors
Tip: Putting together the right components is now even easier: Use our new Configurator.
Functions available on the Home control unit:
|
| ChaserThe visual highlight of all SEQUA LED control units: Softly dimmed, gradual switching on of the staircase lighting. When the staircase is used by two people, the light runs towards each other to great effect and switches off again starting from the center. The running light effect can be deactivated on all control units. |
| Ambient lighting (wall/ceiling/handrail)The LED outputs (up to four) that are unused for step lighting can be used for atmospheric ambient lighting of the staircase at : Optimal for LED strips in the handrail, or spotlights in the ceiling. The slightly switched on lighting activates simultaneously and completely when the stairs are stepped on. |
|
| Permanent lightPermanent light? Gladly! On all control units there is a connection for an external switch, which activates all connected LEDs softly dimmed. The permanent light can also be switched on even if the LED controller is in standby mode. The use of a toggle switch is also possible. Video about the continuous light function |
| Twilight sensorBy connecting a twilight sensor, which deactivates the automatic control during daylight, a demand-oriented and energy-saving switching is ensured. In addition to the sensor-controlled automatic system, the approach lighting and the ambient lighting are also switched off in standby mode. |
 | Speed / time delayYou can adjust the switch-on and switch-off speed of the step lighting, as well as the time delay between the switch-on and switch-off process, entirely according to your wishes at the control units. Sophisticated: Every time you step on the stairs again, the time delay is restarted, so that the light always remains switched on long enough for people following behind |  | Climate-neutral operationWith the help of the renowned company "ClimatePartner", we offset - already since 2016 - the CO² emissions generated by the standby power consumption of the LED control unit - during continuous operation and over the complete warranty period of the control unit. Specifically, we have chosen to support the "Forest Conservation" project in Santa Maria, Brazil. |
 | Soft-ON / Soft-OFFThe Soft-ON/Soft-OFF switching ("dimmer") of all control units ensures particularly smooth transitions when switching the lighting on and off. Flicker-free and without harsh switching processes, this always guarantees a pleasant light. |
| Universal inputYou have the free choice: Whether 10 V LED spotlight, 12 V spot, or 24 V LED strip - our LED control units work together with all common LED light sources without being dependent on a specific operating voltage. |
|
| Ideal for up to 16-step staircasesA staircase in a new building usually has 14 to 16 risers, so these are ideal to illuminate with the Home control unit. |
| PowerfulThe switching capacity of 400 mA per LED output allows you to fully illuminate stairs even with LED strips. For a long-lasting and safe use, all LED outputs are separately equipped with a fuse. |
|
| The original from the inventorThe SEQUA LED controllers were specially developed in Germany and are manufactured entirely in Germany - and have been for over 10 years. The result: High quality "Made in Germany" you can rely on. |
| 5 years manufacturer warrantyAs an expression of confidence in the quality of our products, we grant a five-year manufacturer's warranty on all SEQUA LED control units. A good supply of spare parts and the reparability of our control units in case of need are a matter of course for us. Warranty conditions |
The Home control unit - the effective introduction to sensor-controlled staircase lighting.
The light control unit Home enables you to activate your LED staircase lighting automatically. With the help of two sensors, the control unit detects when you step on the stairs and activates the connected LED lighting gradually and softly dimmed. To do this, the sensors require neither a reflector nor an additional transmitter or receiver unit on the opposite side of the staircase - even open staircases pose no problem.
After leaving the staircase, the LED spotlights - up to 16 - are dimmed down again step by step. In doing so, the animated staircase lighting not only creates a very nice effect, but also helps to save energy. With the optional twilight sensor, the automatic system can also be deactivated during the day and the ambient lighting can be switched off. Above all, however, this sensor-controlled stair lighting creates safety in dark stair areas.
Included in the scope of delivery of the LED control unit is a suitable power supply unit - optionally for our 12V LED spots, our 24 V LED strip or for our 10V recessed spotlights - as well as two motion sensors of your choice.
To start you only need the LED spotlights or LED strips of your choice. Here in our store we have a selection of high quality LEDs matched to our control unit for you.
Our complete sets
Two motion sensors including a 10 m connection cable, a powerful power supply unit, as well as detailed operating instructions are always included in our complete sets. You have the choice of the following power supply and motion sensor variants, so that you can always put together the right set for your requirements.
One power supply unit
The included power supply unit supplies the LED controller and the LED illuminants with power. Thereby, all offered power supplies have extensive protection circuits such as short-circuit, overvoltage and overload protection. You can choose from one of the following models:
|
| 19 W power supply (10 V)The 10 V power supply is specially designed for our SKOFF 10 V LED spotlights. The most powerful 19 W variant is included in each of our complete sets.
|
| 60 W power cord (12 V / 24 V)Noiseless in operation due to passive cooling, manufactured according to EuP directive and also manufacturer-tested under full load: this makes this power supply our recommendation for 12V or 24V LED strips and spotlights up to 55 W total power.
|
|
| 100 W power cord (12 V / 24 V)When using a total of more than 11 m (up to a maximum of 17 m) of our LED strips on an LED control unit, the more powerful 100 W variant is required. This is included in the Advanced and Professional complete sets at no extra charge.
|
| 150 W power cord (12 V / 24 V)With the 150 W power supply variant, you can fully utilize the switching capacity of our Advanced and Professional control units. This allows you to operate up to 28 m of our LED strips on just one power supply unit.
|
Two motion sensors
The two included motion sensors activate the step-by-step lighting when you step on the stairs. In contrast to staircase lighting with motion sensors, the light is not switched on as you pass by, but only when you step on the stairs. You can choose from a pair of the following models:
|
| SEQUA design sensor 73 mm |
| SEQUA design sensor 60 mm |
|
| Sensor in switch program optics |
| NEW: Surface-mounted sensor |
Also included at no charge with each complete set:
|
| 10 m sensor cable10 meter connection cable (3x0.25mm² LIYY) for the motion sensors. This is laid starting from the control unit to the sensors at the beginning and end of the stairs. |
| Operating instructionsA detailed instruction manual with all instructions for connection and configuration. All control units are delivered fully programmed and ready for immediate use. |
|
| Power supply connection cableFrom now on, our complete sets (with 12 V / 24 V power supply units) include a suitable connection cable (4x1.5mm²) for connecting the control unit to the power supply cable. |
| Spare fuseA suitable spare system fuse is included in the scope of delivery from now on, so that it is immediately at hand in case of need. |
All prices incl. 19 % VAT.
Nettes Spielzeug für Erwachsene
Neben dem Steuergerät habe ich mir hier die LED und den kleinen Schaltschrank geholt. Das Steuergerät samt Schaltschrank und Anschluss an das Stromnetz wurde von meinem Elektriker erledigt. Das Verkabeln der LED und Sensoren von mir. Das ist für jeden Hobbyhandwerker machbar. Besucher unseres Hauses und natürlich auch wir sind begeistert von der Beleuchtung und freuen uns darüber, die Investition gemacht zuhaben.
| Lauflicht-Effekt: | ✓ (deaktivierbar) |
| Ambientebeleuchtung: | ✓ Ambientebeleuchtung |
| Dauerlichtschalter-Anschluss: | ✓ |
| Dämmerungssensor-Anschluss: | ✓ |
| Soft-On / Soft-OFF: | ✓ |
| Ein- und Ausschalt-Geschwindigkeit: | Einstellbar |
| Ein- und Ausschalt-Zeitverzögerung: | Einstellbar |
| Eingangsspannung (V): | 10 - 24 V |
| LED-Ausgänge (Stufen): | Bis zu 16 Stufen |
| LED-Ausgangsleistung: | 400 mA / Kanal (6,3 A gesamt) |
| Abnehmbare LED-Anschlussklemmen: | ✗ |
| Einstellbare LED-Helligkeiten (Stufenbeleuchtung): | ✗ Fest eingestellte Helligkeiten |
| Einstellbare LED-Helligkeiten (Ambientebeleuchtung): | ✗ Fest eingestellte Helligkeiten |
| Abmessung: | 162 x 90 x 75 mm |
| Teilungseinheiten: | 9 TE |
Die SEQUA Lichttechnik GmbH hat sich auf die Entwicklung innovativer Beleuchtungssysteme spezialisiert. Unser Anspruch: Zukunftsweisende Funktionen, hochwertige Qualität "Made in Germany" und zeitgemäße Energieeffizienz. So profitieren schon heute viele tausend zufriedene Kunden aus über 20 Ländern von unseren Produkten.
Als Erfinder der sensorgesteuerten LED-Treppenbeleuchtungen und Marktführer in diesem Segment, setzt SEQUA mit den eigens in Deutschland entwickelten LED-Steuergeräten neue Maßstäbe. Darüber hinaus bieten wir Ihnen gerne auch individuell auf Ihre Anforderungen zugeschnittene Beleuchtungslösungen an. Fundiertes Know-How und eine umfangreich ausgestattete Werkstatt (SMD-Bestückungsautomat, CNC-Fräsanlage, Laserschneider, UV/3D-Drucker, etc.) ermöglichen eine schnelle, moderne und kostengünstige Umsetzung.
