Control unit Home - Complete set for automatic LED stair lighting
- Manufacturer Lauflicht-Treppe.de
- Order number: Q10208-COBWW-A
- Product description
| Eingangsspannung (V): | 10 - 24 V |
| Abmessung: | 162 x 90 x 75 mm |
| Dämmerungssensor-Anschluss: | ✓ |
| Ein- und Ausschalt-Geschwindigkeit: | Einstellbar |
| Ein- und Ausschalt-Zeitverzögerung: | Einstellbar |
| Soft-On / Soft-OFF: | ✓ |
| LED-Ausgangsleistung: | 400 mA / Kanal (6,3 A gesamt) |
| LED-Ausgänge (Stufen): | Bis zu 16 Stufen |
| Bewegungserkennung: | Sensor (Präzise beim Durchschreiten) |
| Herkunft: | Made in Germany |
| Garantie: | 2 Jahre Garantie |
Functions available on the Home control unit:
|
| Running lightThe optical highlight of staircase lighting - the softly dimmed, step-by-step switching on of the LEDs - is of course integrated in each of our LED controllers, but can also be deactivated at each controller. |
| Ambient lightingThe LED outputs (up to four) unused for step lighting can be used for additional, general lighting of the stairs. These LED outputs are permanently slightly switched on and thus provide an atmospheric basic lighting (brightness can be set on the Professional control). When the staircase is entered, these LEDs are then activated simultaneously and completely. Ideal for LED strips in the handrail or spotlights in the ceiling |
|
| Permanent lightPermanent light? No problem! On all control units there is a connector for an external switch which activates all connected LEDs softly dimmed. Sophisticated: The continuous light can be switched on at any time, even when the LED control is in standby mode. It is also possible to use a changeover circuit. |
| Twilight sensorThe connection of a twilight sensor that deactivates the automatic control unit during daylight ensures that the gears are switched according to demand and save energy. In addition to the automatic system, in standby mode the entrance and ambient lighting are also switched off. |
|
| Soft-ON / Soft-OFFThe Soft-ON/Soft-OFF circuit ("dimmer") of all control units ensures particularly smooth transitions when switching the lighting on and off. Flicker-free and without hard switching operations, this always guarantees a pleasant light. |
| Speed / time delayThe speed at which the step lighting is switched on and off, as well as the time delay between switching on and switching off, can be adjusted to suit your requirements using separate rotary controls on the control units. Well thought-out: Every time you step on the stairs again, the time delay restarts, so that the light remains switched on long enough for the following persons to follow. |
|
| Ideal for up to 16 stepsA staircase in a new building usually has 14 to 16 gradients, so that it can be ideally illuminated with the control unit Home. |
| PowerfulThe switching capacity of 400 mA per LED output allows you to illuminate stair steps completely even with LED strips. All LED outputs are equipped with a separate fuse for a long service life and safe use. |
|
| Universal inputYou have the free choice: Whether 10 V LED spotlights, 12 V spot, or 24 V LED strips - our LED control units work together with all common LED illuminants without any problems and without being dependent on a certain operating voltage. |
| Climate neutral in operationWith the help of the renowned company "ClimatePartner" we compensate the CO² emissions generated by the standby power consumption of the LED control unit - during continuous operation and over the complete warranty period of the control unit. |
|
| Made in Germany!SEQUA's LED controllers have been specially developed in Germany and are manufactured entirely in Germany. The result: High quality "Made in Germany" that you can rely on. |
| 3 years manufacturer warrantyAs an expression of confidence in the quality of our products, we grant a three-year manufacturer's warranty on all SEQUA LED control units. We also ensure a good supply of spare parts in the long term and, if necessary, the reparability of our control units. |
The Home control unit - the effective introduction to sensor-controlled staircase lighting.
The Home light control unit enables you to activate your LED staircase lighting automatically. With the help of two sensors, the control unit detects when you step on the stairs and activates the connected LED lighting step by step and softly dimmed. To do this, the sensors require neither a reflector nor an additional transmitter or receiver unit on the opposite side of the staircase - even open stairs are no problem.
After leaving the stairs, the LED spotlights - up to 16 - are dimmed out again step by step. This not only creates a very nice effect, but also helps to save energy. With the optional twilight sensor, the automatic system can also be deactivated during the day and the ambient lighting switched off. Above all, however, this sensor-controlled step lighting creates safety in dark stairwells.
The LED control unit is supplied with a suitable power supply unit - either for our 12V LED strips and spots or for our 10V recessed spotlights - and two motion sensors.
All you need to start is the LED spotlights or LED strips of your choice. In our shop, we have compiled a selection of high-quality LEDs for you that are matched to our control unit.
Our complete sets
Two motion sensors including a 10 m connection cable, a powerful power supply unit as well as detailed operating instructions are always included in our complete sets. You have the choice of the following power supply and motion sensor variants, so that you can always put together the right set for your requirements.
One power supply unit
The supplied power supply unit supplies the LED control unit and the LED lamps with power. All power supplies offered have extensive protective circuits such as short-circuit, overvoltage and overload protection. You can choose from one of the following models:
|
| 19 W power supply unit (10 V)The 10 V power supply is specially designed for our 10 V LED spotlights from SKOFF. The most powerful 19 W variant is included in each of our complete sets.
|
| 60 W mains cable (12 V / 24 V)Noiseless in operation due to passive cooling, manufactured according to EuP directive and also manufacturer-tested under full load: this makes this power supply our recommendation for 12V or 24V LED strips and spotlights up to 55 W total power.
|
|
| 100 W power cord (12 V / 24 V).When using a total of more than 12 m (up to a maximum of 18 m) of our LED strips on an LED control unit, the more powerful 100 W variant is required. From now on this is included in the Advanced and Professional Koplettsets at no extra charge.
|
| 150 W power supply (12 V / 24 V)With the new 150 W power supply variant, you can fully utilize the switching capacity of our Advanced and Professional control units. This makes it possible to operate up to 26 m of our LED strips on just one power supply unit.
|
Two motion sensors
The two motion sensors supplied activate the step-by-step lighting when you step on the stairs. In contrast to staircase lighting with motion sensors, the light is not switched on as you pass by, but only when you step on the stairs. You can choose from a pair of the following models:
|
| SEQUA design sensor 73 mm |
| SEQUA design sensor 60 mm |
|
| Sensor in switch range optics |
| NEW: Surface-mounted sensor |
Also included free of charge with each complete set:
|
| 10 m sensor cable10 meter connection cable (3x0.25mm² LIYY) for the motion sensors. This is laid starting from the control unit to the sensors at the beginning and end of the staircase. |
| Operating instructionsA detailed instruction manual with all instructions for connection and configuration. All control units are supplied fully programmed and ready for immediate use. |
|
| Power supply connection cableFrom now on, our complete sets (with 12 V / 24 V power supply units) include a suitable connection cable (4x1.5mm²) for connecting the control unit to the mains cable. |
| Spare fuseA suitable spare system fuse is from now on included in the scope of delivery, so that it is immediately at hand in case of need. |
All prices incl. 19 % VAT.
| Eingangsspannung (V): | 10 - 24 V |
| Abmessung: | 162 x 90 x 75 mm |
| Dämmerungssensor-Anschluss: | ✓ |
| Ein- und Ausschalt-Geschwindigkeit: | Einstellbar |
| Ein- und Ausschalt-Zeitverzögerung: | Einstellbar |
| Soft-On / Soft-OFF: | ✓ |
| LED-Ausgangsleistung: | 400 mA / Kanal (6,3 A gesamt) |
| LED-Ausgänge (Stufen): | Bis zu 16 Stufen |
| Bewegungserkennung: | Sensor (Präzise beim Durchschreiten) |
| Herkunft: | Made in Germany |
| Garantie: | 2 Jahre Garantie |
Lauflicht-Treppe.de bietet Ihnen eine animierte Treppenbeleuchtung mit WOW-Effekt. Das stufenweise einschalten der LEDs in Kombination mit der ausgefeilten Sensortechnik lässt Freunde und Gäste staunen!
Highlight unserer Produktpalette sind die hochwertigen Steuergeräte aus eigener Produktion - komplett "Made in Germany" und das bereits seit über 10 Jahren. Diese bilden das Zentrum der Treppenbeleuchtung. Hieran angeschlossen werden die Bewegungssensoren und die Leuchtmittel Ihrer Wahl: LED-Strahler an der Wand, oder LED-Streifen unter der Stufe.
In unserem kleinen Sortiment stehen Qualität, Nachhaltigkeit und erschwingliche Preise dieser tollen Technik im Vordergrund.
Wir freuen uns, von Ihnen zu hören und auch Ihre Treppe bald in neuem Licht erstrahlen zu lassen.
Ihr Team von Lauflicht-Treppe.de