Advanced control unit - complete set for automatic LED staircase lighting

  • SEQUA
  • ADV-12-60-73W
€489.00 *

Prices incl. VAT plus shipping costs

Delivery time 7 Workdays

Netzteil:

Sensoren:

The Advanced control unit with increased switching capacity is also suitable for long... more
Product information "Advanced control unit - complete set for automatic LED staircase lighting"
Automatische Sensortyp-Erkennung: ✓ Auch PIR, Lichtschranken, Türkontakte, etc.
Lauflicht-Effekt: ✓ (deaktivierbar)
Ambientebeleuchtung: ✓ Ambientebeleuchtung
Dauerlichtschalter-Anschluss:
Dämmerungssensor-Anschluss:
Soft-On / Soft-OFF:
Ein- und Ausschalt-Geschwindigkeit: Einstellbar
Ein- und Ausschalt-Zeitverzögerung: Einstellbar
Eingangsspannung (V): 10 - 24 V
LED-Ausgänge (Stufen): Bis zu 16 Stufen, Bis zu 20 (erweiterbar auf 26) Stufen
LED-Ausgangsleistung: 500 mA / Kanal (10 A gesamt)
Antrittsbeleuchtung: ✓ Mit Antrittsbeleuchtung
Schnellstart-Funktion: ✓ Mit Schnellstart-Funktion
Abnehmbare LED-Anschlussklemmen:
Einstellbare LED-Helligkeiten (Stufenbeleuchtung): ✗ Fest eingestellte Helligkeiten
Einstellbare LED-Helligkeiten (Ambientebeleuchtung): ✗ Fest eingestellte Helligkeiten
Abmessung: 162 x 90 x 75 mm
Teilungseinheiten: 9 TE

The Advanced control unit with increased switching capacity is also suitable for long staircases in old buildings and offers you the most frequently requested functions of LED staircase lighting at a special price-performance ratio

  • Suitable for up to 20-step staircases - modularly expandable to 26 outputs
  • 25% higher switching capacity compared to the Home control unit
  • With the functions of step lighting & quick start
  • Automatic sensor type recognition for light barriers and magnetic contacts
  • A powerful 100 W power supply is included free of charge at your option

Tip: Putting together the right components is now even easier: use our new Configurator.

Highlights of the Advanced control unit:

Step lighting

When this function is activated, the first and last steps are permanently dimmed (brightness levels can be set on the Professional control unit). Visually highlighted in this way, this creates a plus in safety and a basic illumination of your staircase that is pleasant to the eye.

 Video of the staircase lighting

Quick start 

With the switchable Quick Start function, the first steps are activated at increased speed when you enter the staircase, so that the steps in front of you are immediately illuminated. Optically trimmed to perfection, this acceleration takes place very unobtrusively and depending on the set switch-on speed. 

 Video of the quick start function

20 LED outputs - expandable

With the 20 LED outputs of the control unit you can illuminate long old stairs without any problems. Reference value: A staircase in a new building usually has 14 to 16 steps, stairs in an old building often have a few steps more. Not an ordinary staircase? No problem! With an additional module, you can also illuminate stairs with up to 26 steps.

Powerful

The increased switching capacity of 500 mA per LED output allows you to completely illuminate even very wide stairs with LED strips. For long-lasting and safe use, all LED outputs are separately equipped with a fuse.

Automatic sensor type detection

The motion sensors included in the set are the optimal solution in most installation situations. The new sensor type detection additionally enables to operate awide variety of sensors such as PIR motion detectors, light barriers, or door contacts and sets the control unit to these fully automatically.

Removable terminals

Removable screw terminals enable convenient screw connection of the LED supply cables with a cross-section of up to 1.5 mm2, detached from the control unit. During conversion work, the cables can also be removed from the control unit without having to unscrew the cable glands or mix up the cables in the sequence.

Functions available on all control units:

Running light

The visual highlight of all SEQUA LED control units: Softly dimmed, gradual switching on of the staircase lighting. When the staircase is used by two people, the light runs towards each other to particular effect and switches off again starting from the center. The running light effect can be deactivated on all control units.

 Video about the running light function

Ambient lighting (wall/ceiling/handrail)

The LED outputs (up to four) that are unused for step lighting can be used for atmospheric ambient lighting of the staircase at : Optimal for LED strips in the handrail, or spotlights in the ceiling. The slightly switched on lighting activates simultaneously and completely when the stairs are stepped on.

 More about the ambient lighting function

Permanent light

Permanent light? Gladly! On all control units there is a connection for an external switch, which activates all connected LEDs softly dimmed. The permanent light can also be switched on even if the LED controller is in standby mode. The use of a toggle switch is also possible.

 Video about the permanent light function

Twilight sensor

By connecting a twilight sensor, which deactivates the automatic control during daylight, a demand-oriented and energy-saving switching is ensured.

In addition to the sensor-controlled automatic system, the approach lighting and the ambient lighting are also switched off in standby mode.

Speed / time delay

You can adjust the switch-on and switch-off speed of the step lighting, as well as the  time delay between the switch-on and switch-off process, entirely according to your wishes at the control units.

Sophisticated: Every time you step on the stairs again, the time delay is restarted, so that the light always remains switched on long enough for people following behind

Climate-neutral operation

With the help of the renowned company "ClimatePartner", we offset - already since 2016 - the CO² emissions generated by the standby power consumption of the LED control unit - during continuous operation and over the complete warranty period of the control unit. Specifically, we have chosen to support the "Forest Conservation" project in Santa Maria, Brazil.

 SEQUA stands for sustainability

Soft-ON / Soft-OFF

The Soft-ON/Soft-OFF switching ("dimmer") of all control units ensures particularly smooth transitions when switching the lighting on and off. Flicker-free and without harsh switching processes, this always guarantees a pleasant light.

Universal input

You have the free choice: Whether 10 V LED spotlight, 12 V spot, or 24 V LED strip - our LED control units work together with all common LED light sources without being dependent on a specific operating voltage.

The original from the inventor

The SEQUA LED controllers were specially developed in Germany and are manufactured entirely in Germany - and have been for over 10 years. The result: High quality "Made in Germany" you can rely on.

 10 years SEQUA - About us

5 years warranty copy-2x

5 years manufacturer warranty 

As an expression of confidence in the quality of our products, we grant a five-year manufacturer's warranty on all SEQUA LED control units. A good supply of spare parts and the reparability of our control units in case of need are a matter of course for us.

 Warranty conditions

 

The Advanced series of our LED control units offers the most frequently requested functions of LED staircase lighting at a special price-performance ratio.

Included is, in addition to the switchable "entrance lighting", the permanent illumination of the first as well as the last step, also the new function "quick start": With this, the first steps are activated in increased speed when entering the staircase, so that the steps in front of you are instantly illuminated.

With the 20 soft dimming on/off LED outputs of the controller, you can easily illuminate even long old staircases. Do you want to use long LED strips to illuminate very wide or spiral staircases over the full width of the steps? Then the Advanced control is exactly the right one! Each LED output has a capacity of 500 mA - compared to the Home control, this is a plus of 25% per channel or 50% more total power. For a long-lasting and safe operation of your animated staircase lighting, numerous protective circuits are integrated in the device, for example, in addition to reverse polarity protection, short circuit protection and overload protection, each of the 20 outputs is also separately provided with a fuse.

Another plus is its modularity: this allows the Advanced controller to be easily expanded to up to 26 LED outputs, which also makes it possible to illuminate very long staircases in steps.

The terminal block housing enables professional installation directly in house distribution boards and small distribution boards.

Our complete sets Two motion sensors including a 10 m connection cable, a powerful power... mehr

Our complete sets

Two motion sensors including a 10 m connection cable, a powerful power supply unit, as well as detailed operating instructions are always included in our complete sets. You have the choice of the following power supply and motion sensor variants, so that you can always put together the right set for your requirements.

One power supply unit

The included power supply unit supplies the LED controller and the LED illuminants with power. Thereby, all offered power supplies have extensive protection circuits such as short-circuit, overvoltage and overload protection. You can choose from one of the following models:

19 W power supply (10 V)

The 10 V power supply is specially designed for our SKOFF 10 V LED spotlights. The most powerful 19 W variant is included in each of our complete sets.

  • Home: ✓ Included free of charge.
  • Advanced: ✓ Included at no charge.
  • Professional: ✓ Included at no charge.

 

60 W power cord (12 V / 24 V)

Noiseless in operation due to passive cooling, manufactured according to EuP directive and also manufacturer-tested under full load: this makes this power supply our recommendation for 12V or 24V LED strips and spotlights up to 55 W total power.

  • Home: ✓ Included free of charge.
  • Advanced: ✓ Included free of charge.
  • Professional: ✓ Included free of charge.

 

100 W power cord (12 V / 24 V)

When using a total of more than 11 m (up to a maximum of 17 m) of our LED strips on an LED control unit, the more powerful 100 W variant is required. This is included in the Advanced and Professional complete sets at no extra charge.

  • Home: Plus €10.00
  • Advanced: ✓ Included free of charge.
  • Professional: ✓ Included free of charge.

 

150 W power cord (12 V / 24 V)

With the 150 W power supply variant, you can fully utilize the switching capacity of our Advanced and Professional control units. This allows you to operate up to 28 m of our LED strips on just one power supply unit.

  • Home: Plus €20,00 (just 24 V)
  • Advanced: Plus €10,00
  • Professional: Plus €10,00

 

 

Two motion sensors

The two included motion sensors activate the step-by-step lighting when you step on the stairs. In contrast to staircase lighting with motion sensors, the light is not switched on as you pass by, but only when you step on the stairs. You can choose from a pair of the following models:

SEQUA design sensor 73 mm
(for 60 mm switch boxes, flush-mounted)

The matching sensor for wall mounting in a regular 60 mm switch box. Available in aluminum, or white plastic. The width is 73 millimeters - matching screws and an Allen key are included.

  • Home: ✓ Included free of charge.
  • Advanced: ✓ Included free of charge.
  • Professional: ✓ Included free of charge.

 

SEQUA design sensor 60 mm
(self-adhesive, flush-mounted)

There is a high-quality industrial adhesive tape on the back of the 60 mm wide aluminum panel. The sensor needs a small (about 40x25x25 mm) recess for this type of mounting. This variant is NOT suitable for switch boxes !

  • Home: ✓ Included free of charge.
  • Advanced: ✓ Included free of charge.
  • Professional: ✓ Included free of charge.

 

Sensor in switch program optics
(for 60 mm switch boxes, flush-mounted)

For integration into the switch programs of well-known manufacturers. As standard, we deliver the variants "GIRA Standard 55" in "pure white matt", as well as - exclusively for Advanced and Professional - in "anthracite" - further variants on request.

  • Home: ✓ Included free of charge.
  • Advanced: ✓ Included free of charge.
  • Professional: ✓ Included free of charge.

 

NEW: Surface-mounted sensor
(For gluing, or screwing)

Sometimes flush mounting of sensors, such as mounting on glass, is not possible. Here our only 71 x 43 x 26 mm small surface-mounted sensor provides a remedy. The cable feed is drilled into the housing in any direction.

  • Home: ✓ Included free of charge.
  • Advanced: ✓ Included free of charge.
  • Professional: ✓ Included free of charge.

 

 

Also included at no charge with each complete set:

10 m sensor cable

10 meter connection cable (3x0.25mm² LIYY) for the motion sensors. This is laid starting from the control unit to the sensors at the beginning and end of the stairs.

Operating instructions

A detailed instruction manual with all instructions for connection and configuration. All control units are delivered fully programmed and ready for immediate use.

Power supply connection cable

From now on, our complete sets (with 12 V / 24 V power supply units) include a suitable connection cable (4x1.5mm²)  for connecting the control unit to the power supply cable.

Spare fuse

A suitable spare system fuse is included in the scope of delivery from now on, so that it is immediately at hand in case of need. 

All prices incl. 19 % VAT. 

Read, write and discuss reviews... more
Customer evaluation for "Advanced control unit - complete set for automatic LED staircase lighting"
6 Jan 2020

Hochzufrieden nach mehr als 3 Jahren

Wir haben seit über 3 Jahren insgesamt 3 Steuergeräte "Advanced" im Einsatz und sind mehr als zufrieden. Zusätzlich haben wir noch die Astro-Zeit-Module angeschlossen, was für eine automatischen Ein- und Ausschalten der Beleuchtung sorgt.
Staunende Blicke sind einem sicher mit dieser effektvollen Art der Treppenbeleuchtung. Nach 3 Jahren hatten wir noch keine größeren Probleme mit den Steuergeräten. Bei kleinen Problemen wird sofort reagiert und professionell unterstützt.
Herzlichen Dank für diese tollen Produkte und den super Service!
Wir können die Treppenbeleuchtungen nur weiterempfehlen!

4 Dec 2019

Optimale Aufwertung der Treppe und einwandfreie Funktion

Als wir im letzten Jahr unser Haus umbauten, sollte die alte Treppe einen neuen Look bekommen. Bei unserer Suche nach etwas passendem sind wir aufgrund von Empfehlungen auf die Seite von "Interactive Furniture", jetzt SEQUA, geraten. Wir bestellten das Steuergerät inkl. der LED Spots online. Die Lieferung erfolgte schnell und die Einzelteile waren in einem einwandfreien Zustand. Die Installation konnten wir ohne Probleme vornehmen und die Technik hält, was sie verspricht. Unsere alte Treppe wurde durch dieses Produkt total aufgewertet und ist nun ein richtiger Hingucker. Ich erfreue mich jeden Tag wieder an der Treppenbeleuchtung und würde sie auch jedem weiterempfehlen.

4 Dec 2019

Hochwertiges Produkt

Im letzten Jahr habe ich bei 'Interactive Furniture' ein Treppenlicht LED-Steuergerät Advanced gekauft und bin mit dem Produkt mehr als zufrieden!
Die Steuerelektronik ist sehr hochwertig und das Design der LED Spots sehr modern. Die Sensoren sind perfekt auf die Treppennutzung abgestimmt und erfassen tatsächlich nur Personen die die Treppe rauf oder runter gehen und nicht Personen die auf dem Flur sind.
Ich kann die Treppenbeleuchtung nur weiter empfehlen. Es gibt der Wohnung ein modernes Aussehen und erspart nachts das lästige Suchen von Lichtschaltern, wenn man doch noch mal die Treppe runter muss.

Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Eigenschaften: "Advanced control unit - complete set for automatic LED staircase lighting"
Automatische Sensortyp-Erkennung: ✓ Auch PIR, Lichtschranken, Türkontakte, etc.
Lauflicht-Effekt: ✓ (deaktivierbar)
Ambientebeleuchtung: ✓ Ambientebeleuchtung
Dauerlichtschalter-Anschluss:
Dämmerungssensor-Anschluss:
Soft-On / Soft-OFF:
Ein- und Ausschalt-Geschwindigkeit: Einstellbar
Ein- und Ausschalt-Zeitverzögerung: Einstellbar
Eingangsspannung (V): 10 - 24 V
LED-Ausgänge (Stufen): Bis zu 16 Stufen, Bis zu 20 (erweiterbar auf 26) Stufen
LED-Ausgangsleistung: 500 mA / Kanal (10 A gesamt)
Antrittsbeleuchtung: ✓ Mit Antrittsbeleuchtung
Schnellstart-Funktion: ✓ Mit Schnellstart-Funktion
Abnehmbare LED-Anschlussklemmen:
Einstellbare LED-Helligkeiten (Stufenbeleuchtung): ✗ Fest eingestellte Helligkeiten
Einstellbare LED-Helligkeiten (Ambientebeleuchtung): ✗ Fest eingestellte Helligkeiten
Abmessung: 162 x 90 x 75 mm
Teilungseinheiten: 9 TE
Weiterführende Links zu "Advanced control unit - complete set for automatic LED staircase lighting"
Verfügbare Downloads:

Die SEQUA Lichttechnik GmbH hat sich auf die Entwicklung innovativer Beleuchtungssysteme spezialisiert. Unser Anspruch: Zukunftsweisende Funktionen, hochwertige Qualität "Made in Germany" und zeitgemäße Energieeffizienz. So profitieren schon heute viele tausend zufriedene Kunden aus über 20 Ländern von unseren Produkten.

Als Erfinder der sensorgesteuerten LED-Treppenbeleuchtungen und Marktführer in diesem Segment, setzt SEQUA mit den eigens in Deutschland entwickelten LED-Steuergeräten neue Maßstäbe. Darüber hinaus bieten wir Ihnen gerne auch individuell auf Ihre Anforderungen zugeschnittene Beleuchtungslösungen an. Fundiertes Know-How und eine umfangreich ausgestattete Werkstatt (SMD-Bestückungsautomat, CNC-Fräsanlage, Laserschneider, UV/3D-Drucker, etc.) ermöglichen eine schnelle, moderne und kostengünstige Umsetzung.