Advanced control unit - complete outdoor set for LED stairs and path lighting

  • SEQUA
  • ADV-O-100-24-LS
€499.00 *

Prices incl. VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

Netzteil:

Sensoren:

NEW: Our outdoor complete package for stairs and paths outdoors! With this set you can easily... more
Product information "Advanced control unit - complete outdoor set for LED stairs and path lighting"
Automatische Sensortyp-Erkennung: Ja (PIR, Lichtschranken, Türkontakte)
Lauflicht-Effekt: ✓ (deaktivierbar)
Ambientebeleuchtung: ✓ STANDARD (bis zu 4 LED-Ausgänge)
Dauerlichtschalter-Anschluss:
Dämmerungssensor-Anschluss:
Soft-On / Soft-OFF:
Ein- und Ausschalt-Geschwindigkeit: Einstellbar
Ein- und Ausschalt-Zeitverzögerung: Einstellbar
Eingangsspannung (V): 10 - 24 V
LED-Ausgänge (Stufen): 20 (erweiterbar auf 26)
LED-Ausgangsleistung: 500 mA / Kanal (10 A gesamt)
Antrittsbeleuchtung:
Schnellstart-Funktion:
Abnehmbare LED-Anschlussklemmen:
Anschluss an Hausautomatisierung:
Präsenzmelder-Anschluss:
Einstellbare LED-Helligkeiten (Stufenbeleuchtung): ✗ Fest eingestellt
Einstellbare LED-Helligkeiten (Ambientebeleuchtung): ✗ Fest eingestellt
Modus für nicht-dimmbare-Leuchtmittel:
Erweiterte Sensorkalibrierrung:
Abmessung: 162 x 90 x 75 mm
Teilungseinheiten: 9 TE

NEW: Our outdoor complete package for stairs and paths outdoors!

With this set you can easily illuminate stairs and paths in outdoor areas or damp rooms. Instead of our indoor motion sensors, the outdoor set contains waterproof light barriers for entrances and passages, or magnetic contacts for doors and gates . We offer matching waterproof LED strips and LED spotlights.

Important: The included control unit and power supply are not waterproof and must be mounted protected from moisture and extreme temperatures!

Highlights of the control unit Advanced:

Start lighting

By activating this function, the first and last step are illuminated permanently dimmed (brightness adjustable at the control unit Professional). Visually highlighted in this way, this creates a plus in safety and a basic illumination of your staircase that is pleasing to the eye.

Quick start

With the switchable quick start function, the first steps are activated at increased speed when you enter the staircase, so that the steps in front of you are immediately illuminated. Optically trimmed to perfection, this acceleration takes place very inconspicuously and depending on the set switch-on speed. 

20 LED outputs - expandable

With the 20 LED outputs of the control unit, you can easily illuminate long old staircases. Guide value: A staircase in a new building usually has 14 to 16 steps, stairs in an old building often have a few more steps.

Not an ordinary staircase? No problem! Stairs with up to 26 steps can also be illuminated with an additional module.

Powerful

The increased switching capacity of 500 mA per LED output means that even very wide steps can be completely illuminated with LED strips. For long-lasting and safe use, all LED outputs are equipped with a separate fuse.

NEW: Automatic sensor type detection

The motion sensors included in the set are the optimum solution in most installation situations. The new sensor type detection additionally enables to operate a wide range of sensors such as PIR motion detectors, light barriers or door contacts and sets the control unit to these fully automatically.

 Removable terminals

Removable screw terminals enable convenient screw connection of the LED feed lines, detached from the control unit. During conversion work, the cables can also be removed from the control unit without having to undo the screw connections or mix up the cables in the sequence.

Functions available on all control units:

Chaser

The visual highlight of staircase lighting - the softly dimmed, gradual switching on of the LEDs - is of course integrated in every one of our LED control units, but can also be deactivated at every control unit.

Sophisticated: When two people use the staircase, the light runs towards each other to particular effect and switches off again starting from the centre.

Ambient lighting

The LED outputs (up to four) that are not used for step lighting can be used for additional general lighting of the staircase. In doing so, these LED outputs are permanently switched on slightly and thus provide atmospheric ambient lighting (brightness levels can be adjusted at the Professional control unit). When the stairs are stepped on, these LEDs then activate simultaneously and completely. Optimal for LED strips in the handrail, or spotlights in the ceiling

Permanent light

Continuous light? Gladly! There is a connection for an external switch on all control units, which activates all connected LEDs in a softly dimmed manner.

Sophisticated: The permanent light can be switched on at any time, even if the LED control unit is in standby mode. The use of a toggle switch is also possible.

Twilight sensor

The connection of a twilight sensor, which deactivates the automatic system during daylight, ensures demand-oriented and energy-saving switching.

In addition to the automatic system, the entrance and ambient lighting are also switched off in standby mode.

Soft-ON / Soft-OFF

The Soft-ON/Soft-OFF switching ("dimmer") of all control units ensures particularly smooth transitions when switching the lighting on and off. Flicker-free and without hard switching processes, this always guarantees a pleasant light.

Speed / time delay

The switch-on and switch-off speed of the step lighting, as well as the  time delay between the switch-on and switch-off process, can be adjusted according to your wishes using separate rotary controls on the control units.

Sophisticated: Every time you step on the stairs again, the time delay is restarted so that the light always stays on long enough for people following you.

Universal input

You have a free choice: Whether 10 V LED spotlights, 12 V spotlights or 24 V LED strips - our LED control units work with all common LED light sources without being dependent on a specific operating voltage.

Climate-neutral operation

With the help of the renowned company "ClimatePartner", we offset the CO² emissions generated by the standby power consumption of the LED control unit - in continuous operation and throughout the entire warranty period of the control unit.

From the inventor - Made in Germany!

SEQUA's original LED control units were specially developed in Germany and are manufactured entirely in Germany. The result: High quality "Made in Germany" you can rely on.

3 years manufacturer's warranty (warranty conditions)

As an expression of confidence in the quality of our products, we grant a three-year manufacturer's warranty on all SEQUA LED control units. Also in the long term, we ensure a good supply of spare parts and, if necessary, the reparability of our control units.

 

The outdoor complete set with the SEQUA LED control unit: In combination with waterproof sensors, the first choice for staircase lighting in outdoor areas.

In addition to the switchable "entrance lighting", the permanent illumination of the first as well as the last step, the new function "quick start" is also included: With this, the first steps are activated at an increased speed when you enter the staircase, so that the steps in front of you are immediately illuminated.

With the 20 softly dimming on and off LED outputs of the control unit, you can easily illuminate even long paths in outdoor areas. Do you want to use long LED strips to illuminate very wide or winding stairs over the full width of the steps? No problem for the Advanced control! Each LED output has a capacity of 500 mA - compared to the Home control, this is an increase of 25 % per channel or 50 % more total power. Numerous protective circuits are integrated in the device for long-lasting and safe operation. For example, in addition to reverse polarity protection, short-circuit and overload protection, each of the 20 outputs is also provided with a separate fuse.

Another plus is its modularity: this means that the Advanced controller can be easily expanded to up to 26 LED outputs, which also makes it possible to illuminate very long staircases.

The terminal block housing enables professional installation directly in building distribution boards.

Our complete sets Two motion sensors including a 10 m connection cable, a powerful power... mehr

Our complete sets

Two motion sensors including a 10 m connection cable, a powerful power supply unit as well as detailed operating instructions are always included in our complete sets. You have the choice of the following power supply and motion sensor variants, so that you can always put together the right set for your requirements.

One power supply unit

The supplied power supply unit supplies the LED control unit and the LED lamps with power. All power supplies offered have extensive protective circuits such as short-circuit, overvoltage and overload protection. You can choose from one of the following models:

19 W power supply unit (10 V)

The 10 V power supply is specially designed for our 10 V LED spotlights from SKOFF. The most powerful 19 W variant is included in each of our complete sets.

  • Home: ✓ Included free of charge.
  • Advanced: ✓ Included at no charge.
  • Professional: ✓ Included at no charge.

 

60 W mains cable (12 V / 24 V)

Noiseless in operation due to passive cooling, manufactured according to EuP directive and also manufacturer-tested under full load: this makes this power supply our recommendation for 12V or 24V LED strips and spotlights up to 55 W total power.

  • Home: ✓ Included free of charge.
  • Advanced: ✓ Included at no charge.
  • Professional: ✓ Included free of charge.

 

100 W power cord (12 V / 24 V)

When using a total of more than 12 m (up to a maximum of 18 m) of our LED strips on an LED control unit, the more powerful 100 W variant is required. From now on this is included in the Advanced and Professional Koplettsets at no extra charge.

  • Home: Plus € 20.00
  • Advanced: ✓ Included free of charge.
  • Professional: ✓ Included free of charge.

 

150 W power supply (12 V / 24 V)

With the new 150 W power supply variant, you can fully utilize the switching capacity of our Advanced and Professional control units. This makes it possible to operate up to 26 m of our LED strips on just one power supply unit.

  • Home: ✗ Not compatible.
  • Advanced: Plus 20,00 €
  • Professional: Plus 20,00 €

 

 

Two motion sensors

The two motion sensors supplied activate the step-by-step lighting when you step on the stairs. In contrast to staircase lighting with motion sensors, the light is not switched on as you pass by, but only when you step on the stairs.  You can choose from a pair of the following models:

SEQUA design sensor 73 mm
(for 60 mm switch boxes, flush-mounted).

The matching sensor for wall mounting in a regular 60 mm switch box. Available in aluminium, or white plastic. The width is 73 millimetres - matching screws and an Allen key are supplied.

  • Home: ✓ Included free of charge.
  • Advanced: ✓ Included at no charge.
  • Professional: ✓ Included free of charge.

 

SEQUA design sensor 60 mm
(self-adhesive, flush-mounted)

There is a high-quality industrial adhesive tape on the back of the 60 mm wide aluminium panel. The sensor requires a small (approx. 40x25x25 mm) recess for this type of mounting. This variant is NOT suitable for switch boxes !

  • Home: ✓ Included free of charge.
  • Advanced: ✓ Included at no charge.
  • Professional: ✓ Included free of charge.

 

Sensor in switch range optics
(for 60 mm switch boxes, flush-mounted).

This sensor is designed for integration into the switch ranges of well-known manufacturers. We deliver the "GIRA Standard 55 - pure white matt" variant as standard - other variants are available on request.

  • home:  Plus 20,00 €
  • Advanced: Plus 20,00 €
  • Professional: ✓ Included free of charge.

 

NEW: Surface-mounted sensor
(self-adhesive, surface-mounted)

Sometimes a flush-mounted installation of the sensors, such as motage on glass, is not possible. Here our only 71 x 43 x 26 mm small surface-mounted sensor provides a remedy. The cable feed is drilled into the housing in any direction.

  • Home:  Plus 20,00 €
  • Advanced: Plus 20,00 €
  • Professional: ✓ Included free of charge.

 

 

Also included free of charge with each complete set:

10 m sensor cable

10 meter connection cable (3x0.25mm² LIYY) for the motion sensors. This is laid starting from the control unit to the sensors at the beginning and end of the staircase.

Operating instructions

A detailed instruction manual with all instructions for connection and configuration. All control units are supplied fully programmed and ready for immediate use.

Power supply connection cable

From now on, our complete sets (with 12 V / 24 V power supply units) include a suitable connection cable (4x1.5mm²)  for connecting the control unit to the mains cable.

Spare fuse

A suitable spare system fuse is from now on included in the scope of delivery, so that it is immediately at hand in case of need. 

All prices incl. 19 % VAT. 

Read, write and discuss reviews... more
Customer evaluation for "Advanced control unit - complete outdoor set for LED stairs and path lighting"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Eigenschaften: "Advanced control unit - complete outdoor set for LED stairs and path lighting"
Automatische Sensortyp-Erkennung: Ja (PIR, Lichtschranken, Türkontakte)
Lauflicht-Effekt: ✓ (deaktivierbar)
Ambientebeleuchtung: ✓ STANDARD (bis zu 4 LED-Ausgänge)
Dauerlichtschalter-Anschluss:
Dämmerungssensor-Anschluss:
Soft-On / Soft-OFF:
Ein- und Ausschalt-Geschwindigkeit: Einstellbar
Ein- und Ausschalt-Zeitverzögerung: Einstellbar
Eingangsspannung (V): 10 - 24 V
LED-Ausgänge (Stufen): 20 (erweiterbar auf 26)
LED-Ausgangsleistung: 500 mA / Kanal (10 A gesamt)
Antrittsbeleuchtung:
Schnellstart-Funktion:
Abnehmbare LED-Anschlussklemmen:
Anschluss an Hausautomatisierung:
Präsenzmelder-Anschluss:
Einstellbare LED-Helligkeiten (Stufenbeleuchtung): ✗ Fest eingestellt
Einstellbare LED-Helligkeiten (Ambientebeleuchtung): ✗ Fest eingestellt
Modus für nicht-dimmbare-Leuchtmittel:
Erweiterte Sensorkalibrierrung:
Abmessung: 162 x 90 x 75 mm
Teilungseinheiten: 9 TE

Die SEQUA Lichttechnik GmbH hat sich auf die Entwicklung innovativer Beleuchtungssysteme spezialisiert. Unser Anspruch: Zukunftsweisende Funktionen, hochwertige Qualität "Made in Germany" und zeitgemäße Energieeffizienz. So profitieren schon heute viele tausend zufriedene Kunden aus über 20 Ländern von unseren Produkten.

Als Erfinder der sensorgesteuerten LED-Treppenbeleuchtungen und Marktführer in diesem Segment, setzt SEQUA mit den eigens in Deutschland entwickelten LED-Steuergeräten neue Maßstäbe. Darüber hinaus bieten wir Ihnen gerne auch individuell auf Ihre Anforderungen zugeschnittene Beleuchtungslösungen an. Fundiertes Know-How und eine umfangreich ausgestattete Werkstatt (SMD-Bestückungsautomat, CNC-Fräsanlage, Laserschneider, UV/3D-Drucker, etc.) ermöglichen eine schnelle, moderne und kostengünstige Umsetzung.